Programming Channel Memory - Toshiba 43CVR9UR Service Manual

• First, use the ASM (Automatic Search Memory) function to preset all the active channels in your area
automatically. Then, arrange the preset channels with the SEARCH, SKIP functions, MFT (Manual Fine
Tuning) so that you can tune into only desired channels.
• Use the SEARCH function if desired channels cannot be preset with the ASM or if you
channels to specific position numbers one by one.
•
After presetting the channels, you may skip unnecessary position numbers so that only the
channels you want to watch are selected.
To preset channels (ASM, SEARCH)
ASM (Automatic Search Memory)
1
Select the first position number you want to start the
ASM with the CH st buttons or Number buttons.
Press the MENU button, then press the
2
button to display the SET UP menu.
3 Confirm that "COLOR" is set to "AUTO" and "SOUND"
is set to proper system.
If not, press the button, then press the
button to select proper system.
4
Press the button to select ASM.
>
+
5 Press the ( ) button to start the ASM. All active
channels will be preset automatically.
When presetting is complete, the initial position
number will reappear.
After presetting
Check the preset channels by pressing the CH s or t
button.
• If the color of a certain channel is abnormal, the automatic
color system selection (AUTO) may have malfunctioned, or
sound system selection is wrong. In such a case, select
another color and/or sound system.
SEARCH
1 Press the MENU button, then press the
button to display the SET UP menu.
2
Press the (or ) button to select SEARCH.
< >
3 Press the or button to start searching. The
button searches for lower-numbered channels; the
button for higher-numbered channels.
Repeat this process until you can get the desired
channel.
4
When the desired channel is shown, press the
button to select POSITION.
< >
Press the or button repeatedly until the position
5
number to be preset.
6
Press the button to select MEMORY, then press
>
+
the ( ) button to store the channel at the current
position.
7
When you program other channels, repeat steps 2 to 6.

PROGRAMMING CHANNEL MEMORY

< >
or
< >
or
< >
or
<
>
To preset channels (SKIP)
To skip unnecessary position number
1 Select the position number to be skipped with the CH
s t buttons or Number buttons.
2 Press the MENU button, then press the
button to display the SET UP menu.
3 Press the (or
< >
4
Press the or
5
Press the EXIT button to erase the menu display, then
select the position number to be skipped with the
Number buttons. "
position number.
The position number will then be skipped when you
select channels with the CH st buttons.
To restore a skipped position number
1
Select the position number you want to restore with
the Number buttons.
2
Select OFF in step 4 above.
– 36 –
would like to preset
< >
or
) button to select SKIP.
button to select ON.
" mark appears to the left of the
*