Bissell DIGIPRO 2142 Series User Manual page 7

Recharging the Battery: Docking Station
1
NOTE: The unit will
not charge if the
power switch is OFF.
Make sure the docking station is installed
correctly with at least 40 inches to one
side, 12 inches to the opposing side and no
obstructions in front of the docking station.
After the initial charge is complete, plug
the wall adaptor directly into the docking
station.
To test the auto-charge feature of
the dock, remove the robot from the
docking station and make sure the
power switch is in the ON position
Press the green lit power button
until 00 appears on the display.
The vacuum should search for and
back into the docking station if the
appropriate spacing was provided.
www.BISSELL.com
7