Save & Exit - MSI XPOWER GAMING TITANIUM X99A Manual

Password Clear [Enabled]
f
Enables or disables the clear CMOS behavior to clear a set password.
[Enabled] The password will be erased after clear CMOS.
[Disabled] The password will always be kept.
Important
When selecting the Administrator / User Password items, a password box will appear
on the screen. Type the password then press <Enter>. The password typed now will
replace any previous set password from CMOS memory. You will be prompted to
confirm the password. You may also press <Esc> to abort the selection.
To clear a set password, press <Enter> when you are prompted to enter a new
password. A message will confirm the password is being disabled. Once the password
is disabled, you can enter the setup and OS without authorization.
Chassis Intrusion Configuration
f
Press <Enter> to enter the sub-menu.
fChassis Intrusion [Disabled]
Enables or disables recording messages when the chassis is opened. This function
is ready for the chassis equips a chassis intrusion switch.
[Enabled]
[Reset]
[Disabled]
Save & Exit
Discard Changes and Exit
f
Exit BIOS setup without saving any change.
Save Changes and Reboot
f
Save all changes and reboot the system.
Save Changes
f
Save current changes.
Discard Changes
f
Discard all changes and restore to the previous values.
Restore Defaults
f
Restore or load all default values.
Boot Override
f
The installed bootable devices will appear on this menu, you can select one of them to
be the boot device.
70
BIOS Setup
Once the chassis is opened, the system will record and issue a
warning message.
Clear the warning message. After clearing the message, please
return to Enabled or Disabled.
Disables this funcion.