Table of Contents
Advertisement
Selecting the Input Source
1. Press the
button on the right side panel of the TV or the INPUT
button on the remote control to display the Input source list.
2. Press the
buttons to select the input source that you want: DTV /
ATV / AV / SCART / YPbPr / HDMI1 / HDMI2 / HDMI3 / PC / USB.
3. Press the OK button to confirm your selection. If you do not press the OK
button to confirm, the TV will automatically confirm the selected input
source within 4 seconds.
Alternative
Press the TV.RD button to switch to DTV / digital radio channels
directly.
Channel Selection
Press the CH + / – buttons on the remote control repeatedly or the 0-9 buttons to select the channel.
•
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to view the selected channel.
•
If a blocked channel is selected, the password screen will be displayed. Press the 0-9 buttons to enter the password, the
channel will then be unlocked (refer to page 43 for details on Block Channel).
•
Press the FAV button to view the Favourite List. Then use the
button to view the selected channel (refer to page 24 for details on Channel Edit).
•
Press the
button to return to the previously viewed channel.
Listening to the Radio (Radio Mode)
In DTV mode, press the TV.RD button to switch between DTV and Digital radio channel.
•
•
Press the CH
/
buttons on the remote control repeatedly to change the radio stations.
Alternative
Press the LIST button to enter the Channel List. Then use the
Press the OK button to listen to the selected station.
•
Press the GUIDE button to see all the stations in the Programme Guide (refer to page 45 for details on EPG).
Display Channel Information
Press the i button to view the current information.
•
Volume Adjustment
Press the VOL + or – button on the side panel of the TV or on the remote control to adjust the volume.
•
•
If you wish to switch the sound off, press the
resume audio listening.
Switch the TV Speaker to On / Off under OPTION menu (refer to page 40 for details).
•
If the TV speaker is set to Off, an error message will pop up when pressing the VOL + / – button on the remote control.
buttons to highlight and select the channel.
buttons to highlight and select the channel. Press the OK
buttons to highlight and select the station.
MUTE button. Press the
MUTE button again or the VOL + button to
Initial Setup
4
Input Source
DTV
ATV
AV
SCART
YPbPr
HDMI1
HDMI2
HDMI3
PC
USB
OK
GB
19
Advertisement
Table of Contents
