JVC LT-50E73 Instruction Manual page 34

Customising TV Settings
5
3. Press the
GB
setting.
Clock
Off Time
On Time
Sleep Timer
Auto Standby
Time Zone
4. Press the BACK button to return to the previous menu or press the
MENU button to return to the main menu.
5. Press the EXIT button to exit the menu.
34
buttons to select the options. Press the OK button and then press the
The clock is set automatically when receiving a digital signal.
Allows you to set the off time that will automatically switch off the TV. Select from the
following off time options: Off / Once / Every Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. /
Sunday.
Allows you to set the on time that will automatically switch on the TV and tune to the source,
channel and volume you select. Select from the following on time options: Off / Once / Every
Day / Mon.~Fri. / Mon.~Sat. / Sat.~Sun. / Sunday.
Ensure your SCART device is turned off before entering the On Time menu. If your
SCART device is turned on, the On Time menu will default to the SCART device.
The sleep timer automatically switches the TV to standby after the preset time has elapsed.
The clock will be set automatically when receiving a digital signal. Time must be set before
using Sleep Timer function.
Press the buttons to select a period of time after which the TV automatically switches to
standby mode: OFF / 10 / 20 / ... / 180 / 240 min. The timer begins to count down from the
number of minutes selected.
If you turn the TV off after setting the sleep timer, the sleep timer setting will be
erased.
The unit will automatically switch to standby mode
4 hours after the last time the remote control was
used. A reminder screen will pop up and count
down before the unit switches to standby mode.
To turn off the auto standby function, press the
MENU button to display the main menu. Press the
buttons to select the TIME option and then press
the OK button. Press the
OK button to select "Off". Press the EXIT button to exit the main menu. To save energy you
should always turn the auto standby function back to "ON".
When you select a Time Zone city, the TV time is set by the time offset information based on
Time Zone and GMT (Greenwich Mean Time) which is received with the broadcast signal and
the time is set automatically by a digital signal.
buttons to select the Auto Standby option and then press the
buttons to adjust each option's
The unit will automatically switch to standby
mode in 5 minutes.
Press the OK button to continue viewing.
OK