Siemens SIMATIC IFP1200 Basic Operating Instructions Manual page 17

Reducing vibrations
If the device is subjected to greater shocks or vibrations, you must take appropriate measures
to reduce acceleration or amplitudes.
We recommend mounting the device on damping materials, such as rubber-metal vibration
dampers.
Risk analysis and measures
Hazards emanating from unprotected machines or plants
The results of a risk analysis can reveal any hazards emanating from unprotected machinery.
Such hazards may pose a risk of personal injury.
You can prevent personal injury caused by hazards as specified in the risk analysis by taking
the following measures:
• Installing additional protective devices on machinery and plants. In particular, it must
• Use of the device in accordance with its intended purpose, which can be verified by
• Documentation of the test results, which must be entered in the relevant safety reports if
IFP Basic
Operating Instructions, 06/2023, A5E46178354 - AD
WARNING
also be ensured that the programming, configuration and wiring of all I/Os used takes
place in accordance with the safety performance (SIL, PL or Cat.) identified by the
requisite risk analysis.
means of a system function test. This test can detect programming, configuration and
wiring errors.
required.
Safety information
2.3 Notes about usage
17