Related Manuals for Durabook Rotating Hand Strap
Summary of Contents for Durabook Rotating Hand Strap
- Page 1 R8 Rugged Tablet Rotating Hand Strap P/N: 62+031070+00 © 2023 Twinhead International Corp and/or its affiliates. All rights reserved.
-
Page 2: Package Contents
Rotating Hand Strap Package Contents If any of following items is damaged, please contact your retailer. Rotating hand strap Bracket (4) Screw (1) NOTE The pictures are for reference only, actual items may slightly differ. -
Page 3: Installation
Rotating Hand Strap Installation This section will guide you on how to install the rotating hand strap of your tablet. Installing the Rotating Hand Strap To install the rotating hand strap, follow the steps below: 1. Remove the 2 screws from the corner at the back of the device. Align the strap bracket (A) with the notch facing out. - Page 4 Rotating Hand Strap 3. Insert the steel loop into each of the 4 corner straps. 4. Hook the steel loops of the rotating hand strap on the corner brackets and tighten the corner straps.
- Page 5 Rotating Hand Strap 5. Move your hand inside the (B) part of the rotating hand strap. 6. Fix the rotating hand strap firmly so that the tablet does not come off, when turning/moving the device. 7. Adjust the cinch strap of the rotating hand strap.
- Page 6 Rotating Hand Strap 8. Lift the end of the rotating hand strap. 9. Fix the cinch strap accordingly to turn it into a kickstand. Twinhead International Corp. 11F, No.550, Ruiguang Rd., Neihu, Taipei 11492, Taiwan, R.O.C.
Need help?
Do you have a question about the Rotating Hand Strap and is the answer not in the manual?
Questions and answers