Polaris RANGER 1000 2023 Owner's Manual page 108

MAINTENANCE
RADIATOR COOLANT LEVEL
1. Remove the hood panel
Escaping steam can cause burns.
Never remove the pressure cap while
the engine is warm or hot. Always
allow the engine to cool before
removing the pressure cap.
2. Slowly remove the radiator cap
3. View the coolant level through the
opening.
4. Use a funnel and slowly add coolant
as needed.
This procedure is required only if the
cooling system has been drained for
maintenance and/or repair. But, if the
overflow bottle has run dry, the level in
the radiator should be inspected.
5. Reinstall the pressure cap. Use of a
non-standard pressure cap will not
allow the recovery system to
function properly. Your POLARIS
dealer can provide the correct
replacement part.
OVERFLOW BOTTLE COOLANT LEVEL
Always check and change the coolant
at the intervals outlined in the Periodic
Maintenance Chart. Maintain the
coolant level between the minimum and
maximum marks on the bottle (when the
fluid is cool).
106
CAUTION
TIP
q
.