Inspect Your Helmet - HJC CS-R1 Owner's Manual

Your Helmet Correctly
[AWARNINGj
To reduce the risk of serious injury or death, always use your helmet correctly.
Inspect your helmet
To ensure that your helmet is in the best condition to maximize your protection,
always inspect your helmet for damage before riding:
• Check the shield and shield ratchet - retighten shield ratchet screws if necessary.
Be sure not to over-tighten any screws. Plastic base plate screws can break and plastic
screws can strip the screw sleeves if over-tightened.
• Check for helmet damage. If your helmet is damaged or cracked, stop using it
immediately. See "Helmet Replacement" (pp. 20-21) section for further information.
If your helmet has been dropped, you may not be able to see the damage.
• Check for worn or damaged parts. Plastic components may wear out over time. If you
find worn or damaged parts, replace them or purchase a new helmet. See "Replacement
Parts" (p. 18) for information on parts replacement.
AWARNING If parts fall off while riding, your vision may be blocked which could
cause an accident.
• Check the retention system (chin strap) for damage. If it is frayed or ripped, replace the helmet.
• Check that all pads are in place. Both of the cheek pads and the crown pads must be in place.
10