Fasten The Retention System - HJC CS-R1 Owner's Manual

1
Your Helmet Correctly
Check Your Face Shield
If your face shield is scratched or damaged it may reduce the visibility-replace if necessary.
Always make sure you can see well enough to safely operate your motorcycle.
Fasten the Retention System
Fasten the retention system (chin strap) as tight as possible under your jaw without causing pain.
There must be no slack in the strap, and the strap must be snug up against your jaw. If the
retention system is not tight, your helmet may become dislodged or knocked off in an accident.
AWARNING1
Do not rely on the snap to secure the helmet. The snap is provided only to prevent
the strap from flapping in the air. Fasten the retention system only in the following manner:
Snap (Female)
0-Ring
Chin
Strap
Snap
(male)