Service center or our service team are performed by original spare parts are used; Otherwise
accidents for the user may result.
9.
Wait for the machine. Make sure that all movable and fixed parts are in the right position,
no parts are broken or if there are other errors that may affect the smooth operation of the
machine. If anything goes wrong, let the machine repaired before use. Many accidents are
caused by poor maintenance.
10.
Keep reducing the engine and exhaust free of grass, leaves, excessive grease or carbon
covering the risk of a fire hazard.
11.
Baste or never splash the unit with water or other liquids. Keep handles dry, clean and free
of dirt. Clean the machine after each use.
12.
Follow the proper disposal laws and regulations for gas, oil, etc. to protect the environment.
13.
Store when not in use the machine properly. Select a safe location so that the machine can
not be set by unauthorized persons in motion. Do not place outdoors or in a humid
environment from the device. The machine from rolling away.
3.7
maintenance
Improper maintenance or failure to comply or failure to correct a defect, technical defect
or problem, can be a source of danger during operation. Only operate regularly and
properly maintained machine. Just so you can assume that you operate your device safe,
economical and trouble-free. And for a long time.
1.
Before cleaning, repair or inspection work that the engine is off and all moving parts are at
a standstill.
2.
Before any work on the machine the spark plug cap to prevent accidental starting of the
engine.
3.
Let repair your machine by qualified personnel using original spare parts. The safety
guarantee of the machine is guaranteed.
3.8
Special safety
Instructions on hazards, warnings and precautions must be followed carefully to
minimize the risk of injury or damage and incorrect service work.
1.
Check the work carefully and keep it this clean and free of dirt to eliminate tripping
hazards. Work on level ground.
2.
Do not stand in areas where on your body in the event of movement
10
SECURITY
Need help?
Do you have a question about the MD500H PRO and is the answer not in the manual?