Saitek GM2400 User Manual page 8

Simply click in the white bar at the top and then press the key on the keyboard that activates
the command that you are trying to create. You should see it appear in that bar, much like it
did in the example in Method A.
Now click Apply and then OK and you will be back at the Command List. You will see your
new command is now called what you renamed it to. If at any point after creating your
command you come back here and it is still called New Command then simply press F5 on
the keyboard to refresh the screen and it should then change to what you called it. Now, using
the same method, create all the commands you want to program in and you will end up with
something like below (obviously your command names will be different unless you are using
the same game as we are in the example).