Mode Switch - Saitek GM2400 User Manual

Pinkie Switch
This is programmed in exactly the same way as the shift button on the Cyborg stick.

Mode Switch

The three modes are exactly the same as the "two modes" provided by the Cyborg's two shift
buttons – except that you obviously have an extra mode to play with. You will find that the
properties of every axis (rotaries, throttle, rudder and x-axes) and hat switch has three tabs at
the top for each of the modes – this changes to six tabs when you enable the pinkie switch in
its shifted function so you have Mode 1, Mode1 + Pinkie etc. as illustrated below.
The button properties look slightly different in that rather than tabs you have a list of drop-
down menus like so;
Either way, commands can be assigned in the appropriate way so that you can set different
commands for each mode/shift function etc.
P8000/PC Dash 2