Alcatel XPS3010 Plus User Manual page 41

SAFETY
In the event of an electrical hazard, the mains adapter acts as 230V power isolating
device. It should therefore, as a precaution, be installed close to the appliance and be
easily accessible. To disconnect the device from the primary power source, the mains
adapter must be removed from the 230V AC/50 Hz socket.
If the mains adapter fails, it must be replaced by an identical model.
If not connected to the mains power or if there is a mains power failure, telephones that
use cordless handsets will not work. You will then be unable to make or receive calls in
the event of an emergency.
This is why we recommend that you also keep a conventional telephone – one that
doesn't require a power supply – as a backup.
! Do not use your telephone to notify a gas leak when standing in the vicinity of the leak.
It is recommended that you avoid using this device during electrical storms.
Do not attempt to open the batteries, as they contain chemical substances. In the event
of leakage, avoid contact with the skin, eyes, nose and mouth. In the event of contact,
rinse the affected part for about twenty minutes with running water and seek urgent
medical attention. Clean the product with absorbent paper or a dry cloth and contact
your reseller for replacement batteries.
ATLINKS hereby declares that the following models conform to the essential
requirements and other applicable provisions of European directive 1999/5/EC.
Alcatel XPS3010
ENVIRONMENT
This symbol means that your inoperative electronic appliance must be collected
separately and not mixed with the household waste.
The European Union has implemented a specific collection and recycling system for
which producers are responsible.
This appliance has been designed and manufactured with high quality materials and
components that can be recycled and reused.
Electrical and electronic appliances are liable to contain parts that are necessary in order
for the system to work properly but which can become a health and environmental
41