Hoover HH74DBXP User Instructions page 8

Child Lock
8
8
The action will be done
Then, any time when a key will be touched, displays will show "L"
during 2sec. heating remains at the same state.
To deactivate Child Lock, follow the same process explained before.
Then Short beep will be heard and displays will show "n" letter. Hob will
remain unlocked.
Note: An automatic child lock will produce in 15 minutes after total
Switch OFF of the hob.
Double / Triple zones
8
8
To switch ON double extension ring, associated main zone must be
already ON and Indicating power level must be higher than 0.
8.1- Double zone ON
1st Short Press on extension key Switches ON extension ring. LED
over extension key turns ON if Extension ring is ON.
2nd Short Press on extension key Switches OFF extension ring.
Short beep each press on extension key.
8.2- Triple zone ON
1st Short Press on extension key Switches ON 1st extension ring. 1
LED over extension key turns ON if 1st extension ring is ON (left LED
in case of triple zone, middle and only LED in case of double zone) 2nd
Short Press on extension key Switches ON 2nd extension ring. 2
LEDs over extension key turn ON if 1st and 2nd extension rings are
ON
3rd Short Press on extension key. Switches OFF 1st and 2nd
extension rings.
Short beep each press on extension key.
Bridge function
8
8
The bridge can be enabled only when both heaters are off. One heater
of the bridge has been selected, to activate bridge function touch
bridge key.
A beep sounds and the zone LED is switched on if the zone is enabled.
Both bridge heaters will be selected at the same time.
Once the heaters selected, if the power level is not the desired power
level, by the + - keys.
Both bridge heater displays will show same power level.
The function will finish:
- If the bridge key is touched in setting mode
- If user selects power level "0"
Melt ng funct on
8
8
After a heater has been selected, to activate melting function:
- Select melting key
A tone sounds and heater display shows "U"
The heater will work at power level "2"
Being the heater selected, Melting function will finish
- If switched off
- If it is selected to other power level.
8
8
when lock key is touched
8
8
8
8
8
8
Boiling Function:
8
After a heater has been selected, to activate Boiling function:
- Select Boiling key
A tone sounds and heater display shows "P"
The heater will work at maximum power level for 10 minutes.
After these 10 minutes a tone sounds heater will return to level "9"
Pause function
8 8
8
The Pause funct on allows temporary paus ng of the cook ng process,
allow ng the users to answer the door or the telephone w thout
worry ng that the water s bo l ng over. Th s funct on s also useful to
clean the user nterface surface w thout chang ng the cook ng set up.
To select th s funct o , the user should touch "t mer +/- keys" together.
If the "t mer +/- keys" are touched for ½ seconds :
A beep sounds and the cooktop s stopped,
The heaters actual power sett ng s stored and all the act ve heaters
power s set to power level 0,
The heaters auto-sw ch off t me s paused,
All the t mers runn ng count downs are paused,
All keys are locked except "t mer +/- keys" and "on/off key" (T mer keys
can only be act ve f they are used together to deact vate pause
funct on),
T mer d splays noth ng, and all the heaters d splays are gett ng on and
put ng out "0", sw tch ng on segment by segment n left d rect on, and
after that sw tch ng off segment by segment n r ght d rect on,
cont nously.
The stop funct on w ll f n sh:
f the "t mer +/- keys" (together) are touched for more than ½ second a
beep sounds and the heaters actual power sett ng and t mer
countdowns are restored, or f the cooktop s stopped for more than 10
m nutes the cooktop s sw tched off automat cally.
Overflow security
Something (an object or a liquid) is pressing any key during more than
5s. 2 Short Beep + 1 Long beep every 30s while the key is pressed.
Cook-top will turn Off.
matter persist.
Timer
To activate timer, heater must be selected and its power level must
be greater than "0";
Select the zone to be timed. Power level of the zone greater than 0.
Static is displayed in the zone being timed . "0 0" in the digits
reserved for the timer.
1) With "+" or "-" keys, timer time can be chosen. No Beeps at time
change.
2) Pressing simultaneously timer "+/-" keys the timer is cancelled
(goes to 00).
3) If timer "+" or "-" keys is maintained pressed during TBD time, there
is quick setting.
4) When setting timer time, it is possible to go from "00" to "99" with "-"
key, and from "99" to "00" with "+" key.
5) Maximum time 99 minutes.
6) When the time is elapsed and the hob is beeping, press any key and
the alarm and digit sequence will end.
08 GB
8 8
8
8 8
8
This symbol will maintain blinking while the