Advertisement
Quick Links
Advertisement
Related Manuals for Hoover HHK64C
Summary of Contents for Hoover HHK64C
- Page 1 HHK64C Ceramic Hob Instruction Manual...
-
Page 2: Table Of Contents
Content 1…………………………………..…………………Safety instructions 2…………………………………..…………………Installation 3…………………………………..…………………Description of the Ceramic hob surface layout 4…………………………………..…………………Using the ceramic hob 5…………………………………..…………………Hob guidelines 6…………………………………..…………………Maintenance and cleaning 7…………………………………..…………………Environmental note Safety instructions his User Instruction Manual contains important information, including safety & installation points, which will enable you to get the most out of your appliance. - Page 3 ⚫ MPORTANT: The adjacent furniture or housing and all materials used in the installation must be able to Caution! withstand a minimum temperature of ⚫ o not use the ceramic hob until you 95°C above the ambient temperature have read this instruction manual. of the room it is located in, whilst in The ceramic hob is intended for use.
-
Page 4: Installation
and then cover flame e.g. with a lid ⚫ AUTION: The cooking process or a fire blanket. has to be supervised. A short term ⚫ ARNING: Danger of fire: do not cooking process has to be store items on the cooking surfaces. supervised continuously. - Page 5 ⚫ If you have to change the oven power cord, the earthing (yellow/green) conductor must always be 10 mm longer than the line conductors. ⚫ Care must be taken to ensure that the temperature of the mains supply cable does not exceed 50°C.
- Page 6 Installing the hob WARNING Risk of cutting. Be careful of cutting edges. End parts in foamed plastic - be careful. During transportation these could cause slight injury or cuts. Remove the material and envelope of documents from the packaging. Before proceeding with installation read the work instructions carefully. Step.1 Put a towel or cloth on the work surface.Place the hob face down on the protected surface.
- Page 7 ⚫ IMPORTANT: You must observe the ventilation requirements shown in the drawing opposite. ⚫ IMPORTANT: There are ventilation holes around the outside of the hob. YOU MUST ensure that these holes are not blocked by the work top, when you put the hob into position (see drawing opposite).
- Page 8 50-60Hz 60Hz H05VV-F 4G2.5 H05GG-F 4G2.5 KADO XT AHW-4A1-60-R H05VV-F 3G2.5 H07RN-F 4G2.5 ⚫ The cable connections must be in accordance with the diagram located on the bottom of the hob. ⚫ The cable type must be connected to the corresponding power supply terminal box. ⚫...
- Page 9 ➢ The “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire(L1) must be connected to the terminal marked with letter (L1) (220-240V 1N～). ➢ The “blue” neutral wire must be connected to the terminal marked with letter (N) - the live wire L1 must be connected to the terminal marked with letter (L1),.
- Page 10 ✓ Touch button(power button)+ programming button(Corresponding hob top power level selecting). 1.2 Control panel 2.1 Control panel layout: Icons & programming button Function Power button: press and hold to turn on or off the hob NO.1 cooking zone power level selecting NO.2 cooking zone power level selecting NO.3 cooking zone power level selecting NO.4 cooking zone power level selecting...
-
Page 11: Using The Ceramic Hob
Using the ceramic hob Before first use IMPORTANT: You should clean the ceramic hob surface (see “Maintenance and cleaning” section). ✓ You should switch on one cooking zone at a time, for 5 minutes at the maximum setting. This will help to eliminate any new smell that exists and evaporate any humidity that has formed on the heating elements during transit. - Page 12 ✓ If more than one zone is operating at the same time, total power will equal to the sum of the powers of all the working cooking zones, each cooking zone will work according to their power modulation ratio, and will not affect each other. ✓...
- Page 13 the cooking zone currently, and resumes the heating level after the temperature drops. ✓ Residual heat protection: When the whole appliance stops heating, the indicator light of the relative cooking zone will display, indicating that cooking surface temperature is too high, please do not touch to avoid getting burned. ✓...
-
Page 14: Hob Guidelines
High temperature indication lamp: When the glass plate is too hot, the high temperature indication lamp will light up, don’t touch the glass plate until the indication lamp goes out. Shut down:after using,please turn the knob to “OFF”,the hob will stop heating. Caution! ➢... -
Page 15: Maintenance And Cleaning
Maintenance and cleaning Cleaning operations must only be carried out when the hob is cool. The appliance should be disconnected from your mains supply before commencing any cleaning process. Cleaning the ceramic hob top Any residues that are left on the hob top surface from cleaning agents will damage it. -
Page 16: Environmental Note
IMPORTANT: If your appliance appears not to be operating correctly, Please contact with dealer. DO NOT ATTEMPT TO REPAIR THE APPLIANCE YOURSELF. Please note that if an engineer is asked to attend whilst the product is under guarantee and finds that the problem is not the result of an appliance fault, then you may be liable for the cost of the call out charge.