2
1
1
6. Remove the screws 1, and then remove the cover
2.
1
788-014
7. Drain the fuel remaining in the carburetor into an
approved container by loosening the drain screw
1 on the carburetor float chamber.
8. Turn the engine switch to "OFF".
9. Turn the fuel cock knob to "OFF".
707-109b
10. Tighten the drain screw 1.
11. Install the cover and tighten the screws.
12. Tighten further if any screws, bolts and nuts are
loose.
13. Store the generator in a dry, well-ventilated place,
with the cover placed over it.
– 33 –