Yamaha EF2400iS Owner's Manual page 23

2
1
Battery Charging
TIP
9 The generator DC rated voltage is 12V.
9 Start the engine first, and then connect the gener-
ator to the battery for charging.
9 Before starting to charge the battery, make sure
that the DC protector is turned on.
1 Red wire
2 Black wire
1. Start the engine.
2. Press in the DC protector.
762-046
3. Connect the red battery charger lead
itive (+) battery terminal.
4. Connect the black battery charger lead
negative (-) battery terminal.
12v
762-047
NOTICE
9 Be sure to connect the red battery charger lead
to the positive (+) battery terminal, and connect
the black lead to the negative (-) battery termi-
nal. Do not reverse these positions.
9 Connect the battery charger leads to the bat-
tery terminals securely so that they are not dis-
connected due to engine vibration or other dis-
turbances.
9 Charge the battery in the correct procedure by
following instructions in the owner's manual
w
for the battery.
9 The DC protector turns off 2 automatically if
q
current above the rated flows during battery
charging.
763-238a
To restart charging the battery, turn the DC pro-
tector on by pressing its button to "ON" 1. If
the DC protector turns off again, stop charging
the battery immediately and consult a Yamaha
dealer.
1 "ON"
2 "OFF"
– 18 –
1 to the pos-
2 to the