Pulse Contact Inputs; User Interface Menu Abbreviations Defined - Veris Industries E51H2 Installation Manual

E51H2, E51H5 Installation Guide

Pulse Contact Inputs

User Interface (UI)
Menu Abbreviations
Defined
ZL0109-0D Page 12 of 32
Alta Labs, Enercept, Enspector, Hawkeye, Trustat, Aerospond, Veris, and the Veris 'V' logo are trademarks or registered trademarks of Veris Industries, L.L.C. in the USA and/or other countries.
The E51H5 has two inputs with pulse accumulators for solid state or mechanical contacts in other sensors, such as water or gas
flow meters. These inputs are isolated from the measured circuits and referenced to the communication signal ground. Use with
contacts that do not require current to remove oxidation.
4-10 VDC
nominal
The E51H2 has one input with pulse accumulator as described above, and one phase loss alarm output terminal.
4-10 VDC
nominal
The user can set the display mode to either IEC or IEEE notation in the SETUP menu.
Main Menu
IEC IEEE
D D Demand
MAX M Maximum Demand
P W Present Real Power
Q VAR Present Reactive Power
S VA Present Apparent Power
A A Amps
UAB, UBC, UAC VAB, VBC, VAC Voltage Line to Line
V VLN Voltage Line to Neutral
PF PF Power Factor
U VLL Voltage Line to Line
HZ HZ Frequency
KSh KVAh Accumulated Apparent
Energy
KQh KVARh Accumulated Reactive
Energy
KPh KWh Accumulated Real Energy
PLOSS PLOSS Phase Loss
LOWPF LOWPF Low Power Factor Error
©2018 Veris Industries USA 800.354.8556 or +1.503.598.4564 / support@veris.com
Other companies' trademarks are hereby acknowledged to belong to their respective owners.
Pulse Input
Contacts
~10 k
+
Phase Loss
Alarm Output
~10 k
+
Description
F ERR
I OVR
V OVR
PULSE
_PHASE
ALERT
INFO
MODEL
OS
RS
SN
RESET
PASWD
ENERG
DEMND
Comm S
Output
Equivalent
Circuit
Comm
Ground
Pulse Input
Comm S
Output
Equivalent
Circuit
Comm
Ground
Main Menu
IEC IEEE Description
F ERR Frequency Error
I OVR Over Current
V OVR Over Voltage
PULSE kWh Pulse Output Overrun
(configuration error)
_PHASE Summary Data for 1, 2, or 3
active phases
ALERT Diagnostic Alert Status
INFO Unit Information
MODEL Model Number
OS Operating System
RS Reset System
SN Serial Number
RESET Reset Data
PASWD Enter Reset or Setup
Password
ENERG Reset Energy Accumulators
DEMND Reset Demand Maximums
TM
0818