Specification Chart; Safety Guidelines - Craftsman 919.167270 Owner's Manual

Hide thumbs Also See for 919.167270:

Owner's manual (48 pages)

Table of Contents

Available languages

Model No.

*Running HP

Bore

Stroke

Voltage-Single Phase

Minimum Branch Circuit Requirement

Fuse Type

Air Tank Capacity

Approx. Cut-In

Approx. Cut-out

*SCFM @ 40 psig

*SCFM @ 90 psig

*(Tested per ISO 1217)

Refer to Glossary for abbreviations

SAFETY GUIDELINES - DEFINITIONS

This manual contains information that is important for you to know and under-

stand. This information relates to protecting YOUR SAFETY and PREVENTING

EQUIPMENT PROBLEMS. To help you recognize this information, we use the

symbols below. Please read the manual and pay attention to these symbols.

hazardous situation which, if not

avoided, will result in death or

serious injury.

hazardous situation which, if not

avoided, could result in death or

serious injury.

IMPORTANT SAFETY INSTRUCTIONS

known to the State of California to cause cancer, birth defects or other

reproductive harm. Some example of these chemicals are:

•

lead from lead-based paints

•

crystalline silica from bricks and cement and other masonry products

•

arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this

type of work. To reduce your exposure to these chemicals: work in a well

ventilated area, and work with approved safety equipment, al ways wear

OSHA/MSHA/NIOSH approved, properly fit ting face mask or res pi ra tor

when us ing such tools.

When using air tools, basic safety precautions should always be followed to

reduce the risk of of personal injury.