Specification Chart; Safety Guidelines - Craftsman 919.724500 Owner's Manual

Model No.
Max. Developed HP
Bore
Stroke
Voltage-Single Phase
Minimum Branch Circuit Requirement
Fuse Type
Air Tank Capacity
Approx. Cut-In
Approx. Cut-out
SCFM @ 40 psig
SCFM @ 90 psig
SAFETY GUIDELINES - DEFINITIONS
This manual contains information that is important for you to know and
understand. This information relates to protecting YOUR SAFETY and
PREVENTING EQUIPMENT PROBLEMS. To help you recognize this
information, we use the symbols below. Please read the manual and pay
attention to these symbols.
situation which, if not avoided, will
result in death or serious injury
Indicates a
potentially
hazardous situation which, if not
avoided, could result in death or
serious injury.
IMPORTANT SAFETY INSTRUCTIONS
known (to the State of California) to cause cancer, birth defects or other
reproductive harm. Some example of these chemicals are:
●
lead from lead-based paints
●
crystalline silica from bricks and cement and other masonry products
●
arsenic and chromium from chemically-treated lumber
Your risk from these exposures varies, depending on how often you do this
type of work. To reduce your exposure to these chemicals: work in a well
ventilated area, and work with approved safety equipment, always wear
MSHA/NIOSH approved, properly fitting face mask or respirator when using
such tools.
When using air tools, basic safety precautions should always be followed to
reduce the risk of of personal injury.

SPECIFICATION CHART

Indicates an
imminently hazardous
Some dust created by power sanding, sawing, grinding,
drilling, and other construction activities contains chemicals
919.724500
6
2.375"
1.35"
120V/60HZ/1PH
15 amps
Time Delay
33
120
150
7.8
5.5
situation which, if not avoided, may
result in minor or moderate injury.
.
indicates a potentially hazardous
situation which, if not avoided, may
result in property damage.
3- ENG
Indicates a
potentially hazardous
Used without the
safety alert symbol
D26706