SMC Networks SMC7800A Installation Manual page 41

10BASE-T
IEEE 802.3 specification for 10 Mbps Ethernet over two pairs of
Category 3, 4, or 5 UTP cable.
100BASE-TX
IEEE 802.3u specification for 100 Mbps Fast Ethernet over two pairs of
Category 5 or better UTP cable.
Auto-Negotiation
Signalling method allowing each node to select its optimum operational
mode (e.g., speed and duplex mode) based on the capabilities of the node
to which it is connected.
Bandwidth
The difference between the highest and lowest frequencies available for
network signals. Also synonymous with wire speed, the actual speed of the
data transmission along the cable.
Domain Name Service (DNS)
A system used for translating host names for network nodes into IP
addresses.
Dynamic Host Control Protocol (DHCP)
Provides a framework for passing configuration information to hosts on a
TCP/IP network. DHCP is based on the Bootstrap Protocol (BOOTP),
adding the capability of automatic allocation of reusable network addresses
and additional configuration options.
End Station
A workstation, server, or other device that does not forward traffic.
G
LOSSARY
Glossary-1