Connectors; Switching On The Meter - Xylem WTW Multi 3320 Operating Manual

Multi 3320
ba77053e04 07/2018

4.1.4 Connectors

5 1 2
1 pH/ISE electrode
2 Temperature sensor
3 D.O. sensor or conductivity measuring cell
4 Mini USB-B interface
5 Service interface
CAUTION
Only connect sensors to the meter that cannot return any volt-
ages or currents that are not allowed (> SELV and > current
circuit with current limiting).
Almost all customary sensors fulfill these conditions.
4.2

Switching on the meter

1. Switch the meter on with <On/Off>.
The meter performs a self-test.
The display shows the manufacturer's logo while the self-test is being
performed.
The measured value display appears.
pH
6.949
15.02.2014
Menu
14:15
4
3
25.0
°C
Operation
15