Using The Rain Sensor's Memory Function; Using Windscreen And Headlamp Washers - Volvo XC90 TWIN ENGINE 2019 Owner's Manual

WINDOWS, GLASS AND MIRRORS
Using the rain sensor's memory
function
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen.
Activating/deactivating the memory
function
The memory function for the rain sensor can
be activated in such a way that the rain sensor
button does not need to be depressed each
time the car is started:
1. Press Settings in the top view in the cen-
tre display.
2. Press My Car Wipers.
3. Select Rain Sensor Memory
deactivate the memory function.
Related information
Using the rain sensor (p. 185)
•

Using windscreen and headlamp washers

•
(p. 186)
Using automatic rear windscreen wiping
•
when reversing (p. 188)
Wiper blades and washer fluid (p. 183)
•
Using the rear window wiper and washer
•
(p. 187)
Filling washer fluid (p. 694)
•
186
Set the wiper blades in service position
•
(p. 693)
Replacing windscreen wiper blades
•
(p. 692)
Replacing the wiper blade, rear window
•
(p. 691)
Using windscreen wipers (p. 184)
•
to activate/
Using windscreen and headlamp
washers
Windscreen and headlamp washers are
designed to clean the windscreen and head-
lamps. Windscreen and headlamp washers
are started using the right-hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
Move the right-hand stalk switch toward
–
the steering wheel to start the windscreen
and headlamp washers.
> The windscreen wipers will make sev-
eral more sweeps once the stalk switch
has been released.