Activating And Deactivating The Rain Sensor's Memory Function; Using Windscreen And Headlamp Washers - Volvo XC90 Recharge Owner's Manual

WINDOWS, GLASS AND MIRRORS
Activating and deactivating the
rain sensor's memory function
The rain sensor automatically starts the wind-
screen wipers based on how much water it
detects on the windscreen.
When the memory function is activated, the
rain sensor button does not need to be
pressed every time the vehicle is started:
1. Settings
Tap on in the centre display's
top view.
2. Press
My Car Wipers.
3. Select Rain Sensor Memory
deactivate the memory function.
Related information
Using the rain sensor (p. 185)
•

Using windscreen and headlamp washers

•
(p. 186)
Using automatic rear windscreen wiping
•
when reversing (p. 188)
Wiper blades and washer fluid (p. 183)
•
Using the rear window wiper and rear
•
window washer (p. 187)
Filling washer fluid (p. 698)
•
Set the wiper blades in service position
•
(p. 697)
Replacing windscreen wiper blades
•
(p. 696)
186
Replacing the wiper blade, rear window
•
(p. 695)
Using windscreen wipers (p. 184)
•
to activate/
Using windscreen and headlamp
washers
Windscreen and headlamp washers are
designed to clean the windscreen and head-
lamps. Windscreen and headlamp washers
are started using the right-hand stalk switch.
Starting windscreen and headlamp
washers
Washing function, right-hand stalk switch.
Move the right-hand stalk switch toward
–
the steering wheel to start the windscreen
and headlamp washers.
> The windscreen wipers will make sev-
eral more sweeps once the stalk switch
has been released.