Synology DS3617xsII Hardware Installation Manual page 7

3 Load drives into drive trays.
• For 3.5" drives: Remove the fastening panels from the sides of the drive tray. Place the drive into the drive
tray. Then insert the fastening panels to secure the drive in place.
• For 2.5" drives: Remove the fastening panels from the sides of the drive tray and store them in a safe
place. Place the drive into the blue area (shown below) of the drive tray. Turn the tray upside down and
tighten the screws to secure the drive in place.
4 Insert the loaded drive tray into the empty drive bay.
Make sure the tray is pushed in all the way. Otherwise, the drive might not be able to function properly.
Note:
5 Press the handle in flush with the front panel to hold the drive tray in place.
7 Chapter 2: Hardware Setup