SMC Networks SMCWUSBT-G Quick Installation Manual page 6

STEP 8. Plug in your wireless USB 2.0
adapter as indicated in the pop up
window below.
STEP 9. The USB device you inserted is
found.
Step 10. The System will check for new
hardware and meanwhile the "Found
New Hardware Wizard" screen will
appear: Choose "Install the
software automatically
(Recommended)" and then click
"Next".
9 9
STEP 11. After clicking "Next" at the
last step, you will see a
window showing you:
Please wait while the wizard searches.
STEP 11a. While the wizard is running,
a "Hardware Installation"
warning window may pop up:
Click "Continue Anyway"
to continue the installation
process.
STEP 12. The wizard is installing the
driver, this may take several
minutes.
1 1 0 0