SMC Networks SMCWUSBT-G Quick Installation Manual page 5

You are now ready to install the driver and the utility for the USB
adapter. Thus, the following instructions will guide through overall
the recommended installation procedures. In OS-specific
situations, you should follow the on-screen instructions depending
on your Operating system in order to proceed. (For the details,
please read refer the user's manual.)
Follow these steps below to install the wireless adapter driver and
utility.
STEP 1. Close all Windows and programs that are running on your
PC or Laptop.
STEP 2. Insert the Utility CD into your
CD-ROM drive and double click
Setup.exe in the companion CD.
STEP 3. After you double click Setup.exe
in the companion CD, a "Preparing
Setup" window appears, and you
may go to a next step when the
processing bars end.
STEP 4. When the welcome screen
appears, click "Next".
7 7
STEP 5. Please select "Complete"
and click "Next".
STEP 6. The installation process
takes a few minutes, please
wait until it has completed.
STEP 7. During installation, a warning
window may pop up.
Click "Continue Anyway"
to continue the installation
process.
8 8