SMC Networks SMCWUSBT-G Quick Installation Manual page 3

To install and connect to the SMCWUSBT-G, you must have:
• A PC running Windows 98SE/Me/2000/XP.
• CD-ROM drive.
• An available USB 2.0 port.
• Minimum of 32MB RAM and 300 MHz CPU.
• Minimum of 10MB available hard disk space for utility and driver
installation.
• Another IEEE 802.11b, or 802.11g compliant device installed on your
network such as the Barricade™ g 802.11g 108Mbps Wireless
Broadband Router (SMCWBR14T-G), or another wireless adapter,
such as the EZ Connect™ g 802.11g 108Mbps Wireless PCI Card
(SMCWCBT-G).
3 3
SMC's EZ Connect™ g 802.11g 108Mbps Wireless USB 2.0 Adapter
(SMCWUSBT-G) is a high speed IEEE 802.11g-compliant wireless
network adapter that supports up to 108Mbps data rate, and
seamlessly integrates with existing Ethernet networks to support
applications such as mobile users or temporary conferences. This
solution offers a high data rate and reliable wireless connectivity
with considerable cost savings over wired LANs (which include
long-term maintenance overhead for cabling). Just install enough
wireless access points to cover your network area, plug wireless
cards into your notebooks or computers, and start networking.
The EZ Connect™ g 802.11g 108Mbps Wireless USB 2.0 Adapter
has two status LED indicators.
LED STATUS
Link On
Flashing
DESCRIPTION
Indicates a valid connection.
Indicates the adapter is
scanning for available networks.
4 4