Siemens Gigaset AS180 Manual page 4

Connecting the charging cradle (if included)
If you need to disconnect the plug from the charging cradle,
press the release button
Setting up the handset for use
Inserting the batteries and closing the battery cover
Use only the rechargeable batteries (
Communications GmbH
as this could result in significant health risks and damage to property. For example,
the outer casing of the batteries could be destroyed or the batteries could explode.
The phone could also malfunction or be damaged as a result of using batteries that
are not of the recommended type.
* Gigaset Communications GmbH is a licensee of the Siemens trademark.
¤
Insert the batteries the right
way round.
The polarity is indicated in/on
the battery compartment.
If you need to open the battery cover,
for instance to replace the batteries,
place your fingertip in the grooved area
on the top of the cover and slide down.
2
1
1
The display is protected by a plastic film.
Please remove the protective film!
Warning
*
. Never use conventional (non-rechargeable) batteries,
4
¤
Connect the flat plug from the power supply 1.
¤
Plug the mains adapter into the plug socket 2.
and disconnect the plug 2.
¢
page 12) recommended by Gigaset
¤
Slide the battery cover back into the
main casing until it clicks into place.
2
1
+ –