Front Panel Control; Rear Panel - Interfaces - Fortinet FortiNDR 3500F Quick Start Manual

Front Panel - Control
1 2
1
Hard Drive Power LED indicators
Green: Operating normally
Off: Hard drive off
2
Hard Drive Activity LED indicators
activity: Activity dependent on drive carrier
Hard Drive
Flashes Green for 2 secs: Identifying drive preparing for removal
Off: Drive ready for removal
Flashes Green, Amber, and then turns off: Predicted Drive Failure
Flashes Amber four times: Drive failed
Solid Green: Drive online
Flashes Green for 3 secs,
Drive rebuild stopped
3
Power Button LED turns the device on/off
Green: Power is on
Off: Power is off
4
USB (2x USB 3.0) for future use
5
Micro USB not in use
6
VGA Port (DB15) connect to a display
6
3 4
Amber for 3 secs, and turns off after 6 secs:
1
5 6
1
ID Button & LED press to identify a system in a rack
2
IPMI Port not in use.
CLI Console Port (DB9) optional connection to the management computer
VGA Port (DB15) connect to a display
3
USB (x2 USB 3.0) for future use
4
Ports 5 to 8 (SFP+) default sniffer/traffic capture ports (hardware defined)
Green: Connected at 10 Gbps
Link
Amber: Connected at 1 Mbps
(Top LED)
Off: Not connected
5
Port 1 (Left RJ45) default management port IP 192.168.1.88
Port 2 (Right RJ45) default sniffer/traffic capture port (hardware defined)
Link
Green: Connected at 10 Gbps
(Left LED)
Amber: Connected at 1000/100/10 Mbps
Off: Not connected
Act Flashing
(Right LED)
Off: No activity
6
Port 3 (Left RJ45) default HA heartbeat and synchronization (hardware defined)
Port 4 (Right RJ45) default HA heartbeat and synchronization (hardware defined)
Link Green: Connected at 1Gbps
(Left LED)
Amber: Connected at 100/10 Mbps
Off: Not connected
Act
Flashing
(Right LED)
Off: No activity

Rear Panel - Interfaces

3 4
2
Blue: ID function is on
Off: ID function is off
Act
(Bottom LED)
Green: Data activity
Green: Data activity
5 6
Flashing Green: Data activity
Off: No activity
Note: The RJ45 Ports on
the device are not labelled
7