Table of Contents
Advertisement
FortiGate-7030E chassis
The FortiGate-7030E is a 6U 19-inch rackmount 3-slot chassis with a 80Gbps fabric and 1Gbps base backplane
designed by Fortinet. The fabric backplane provides network data communication and the base backplane provides
management and synch communication among the chassis slots. Power is provided to the chassis using three hot
swappable 2+1 redundant 100-240 VAC, 50-60 Hz power supply units (PSUs). You can also optionally add a fourth PSU.
The FortiGate-7030E can also be equipped with DC PSUs allowing you to connect the chassis to -48V DC power.
FortiGate-7030E front panel
The FortiGate-7030E chassis is managed by a single System Management Module (SMM) that includes an Ethernet
connection as well as two switchable console ports that provide console connections to the modules in the chassis slots.
The SMM controls chassis cooling and power management and provides an interface for managing the modules
installed in the chassis. The standard configuration of the FortiGate-7030E includes one FIM (interface) module in
chassis slot 1 and two FPM (processing) modules in chassis slots 3 and 4. The front panel also includes a sealed blank
panel. Breaking the seal or removing the panel voids your warranty. Two versions of the FortiGate-7030E are available:
FortiGate-7030E QSFP28 and includes one FIM-7920E and two FPM-7620Es
l
FortiGate-7030E SFP10G and includes one FIM-7901E and two FPM-7620Es
l
FortiGate-7030E front panel (FortiGate-7030E-SFP10G model)
FPM-7620E
slot 3
FIM-7901E
slot 1
Blank panel
(do not
remove)
FPM-7620E
slot 4
FortiGate-7030E 6.2.3 System Guide
Fortinet Technologies Inc.
System Management Module
ESD
socket
6
Advertisement
Table of Contents
