Method 2 Uefi Hii（Uefi Utility - HighPoint RocketAIC 7505HW Series Installation Manual

Nvme boot raid windows

Hide thumbs Also See for RocketAIC 7505HW Series:

Table of Contents

HighPoint NVMe Boot RAID Windows Installation Guide

Method 2 UEFI HII（UEFI Utility）

Note:

The following installation process uses the SSD7505 and SuperMicro H12SSL-i

motherboard as an example.

Step 1 – Create RAID

Note:

RocketAIC 7505HW series, RocketAIC 7540HW series and RocketAIC 7749EW series NVMe drives

are already pre- configured with RAID0. You can skip this step. If you want to use another type of RAID for

Boot-RAID, you can refer to the following steps.

Power on the motherboard→the motherboard BIOS→Advanced, "HighPoint RAID

Management Utility" should appear under Advanced options.

Enter "HighPoint RAID Management Utility", Select Create RAID...

In Create menu, a device list will appear, and display all available hard disk drives. Select

the RAID type from dropdown list. Use the up and down keys of the keyboard or the mouse

to select the RAID type and press the Enter key.

Insert the Windows install media in (such as a Bootable USB drives) and reboot the system.

Table of Contents