Shutdown; Show Interface Ethernet - SMC Networks EliteConnect SMC2552W-G2 User Manual

7
Command Line Interface

shutdown

This command disables the Ethernet interface. To restart a disabled interface, use
the no form.
Syntax
shutdown
no shutdown
Default Setting
Interface enabled
Command Mode
Interface Configuration (Ethernet)
Command Usage
This command allows you to disable the Ethernet port due to abnormal
behavior (e.g., excessive collisions), and reenable it after the problem has
been resolved. You may also want to disable the Ethernet port for security
reasons.
Example
The following example disables the Ethernet port.
Enterprise AP(if-ethernet)#shutdown
Enterprise AP(if-ethernet)#

show interface ethernet

This command displays the status for the Ethernet interface.
Syntax
show interface [ethernet]
Default Setting
Ethernet interface
Command Mode
Exec
7-92