SMC Networks EliteConnect SMC2552W-G2 User Manual page 131

6
System Configuration
CLI Commands for Displaying System Settings – To view the current access point
system settings, use the show system command from the Exec mode. To view the
current radio interface settings, use the show interface wireless g 0 command
(see page 7-108).
Enterprise AP#show system
System Information
==============================================================
Serial Number
System Up time
System Name
System Location
System Contact
System Country Code
MAC Address
MAC Address
Radio G MAC Address
IP Address
Subnet Mask
Default Gateway
VLAN State
Management VLAN ID(AP): 1
IAPP State
DHCP Client
HTTP Server
HTTP Server Port
HTTP Session Timeout
HTTPS Server
HTTPS Server Port
Slot Status
Boot Rom Version
Software Version
SSH Server
SSH Server Port
Telnet Server
WEB Redirect
DHCP Relay
==============================================================
Enterprise AP#
6-84
:
: 1 days, 3 hours, 41 minutes, 40 seconds
: Enterprise Wireless AP
:
: Contact
: US - UNITED STATES
: 00-13-F7-1C-33-66
: 00-13-F7-1C-33-66
: 00-13-F7-1C-33-67
: 192.168.2.2
: 255.255.255.0
: 0.0.0.0
: DISABLED
: ENABLED
: ENABLED
: ENABLED
: 80
: 300 sec(s)
: ENABLED
: 443
: Single band(b/g)
: v1.1.1
: v5.0.0.0
: ENABLED
: 22
: ENABLED
: DISABLED
: DISABLED
7-23