Table 1-1 Port Status Leds; Table 1-2 System Status Leds; Figure 1-4 System Leds - SMC Networks TigerSwitch SMC8126L2 Installation Manual

1
Introduction
Label Color
Link/Activity/ On/Flashing Amber
Speed
On/Flashing Green
Off
Port 21/22/23/ Green
24
Off
Port 25/26 On/Flashing Amber
On/Flashing Green
Off
LED Condition
Power Green
Off
Diag Flashing Green/
Amber
Green
Amber
1-4

Table 1-1 Port Status LEDs

Description
Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
Port has a valid link at 1000 Mbps. Flashing indicates activity.
There is no valid link on the port.
SFP transceiver plugged in.
No SFP transceiver plugged in.
Port has a valid link at 10 or 100 Mbps. Flashing indicates activity.
Port has a valid link at 1000 Mbps. Flashing indicates activity.
There is no valid link on the port.
25 26

Figure 1-4 System LEDs

Table 1-2 System Status LEDs

Status
Internal power is operating normally.
Power off or failure.
System self-diagnostic test in progress.
System self-diagnostic test successfully completed.
System self-diagnostic test has detected a fault.
System LEDs