Chapter 1: Introduction; Overview; Figure 1-1 Front Panel; Figure 1-2 Rear Panel - SMC Networks TigerSwitch SMC8126L2 Installation Manual

Tigerswitch 10/100/1000 26-port gigabit managed switch
Hide thumbs Also See for TigerSwitch SMC8126L2:
Table of Contents

Advertisement

Chapter 1: Introduction

Overview

The TigerSwitch 10/100/1000, SMC8126L2, is an intelligent Layer 2 switch with 26
10/100/1000BASE-T ports, four of which are combination ports
four SFP transceiver slots (see Figure 1-1, Ports 21-24).
The SMC8126L2 includes an SNMP-based management agent embedded on the
main board, which supports both in-band and out-of-band access for managing the
switch.
The switch can easily tame your network with full support for Spanning Tree
Protocol, Multicast Switching, and Virtual LANs. It brings order to poorly performing
networks by segregating them into separate broadcast domains with IEEE 802.1Q
compliant VLANs, empowers multimedia applications with multicast switching and
CoS services.
SMC8126L2
*
If an SFP transceiver is plugged in, the corresponding RJ-45 port is disabled for ports
21-24.
Port Status LEDs
10/100/1000 Mbps RJ-45 Ports

Figure 1-1 Front Panel

Figure 1-2 Rear Panel

*
that are shared with
RJ-45 Ports LED
RJ-45 Ports
Console Port
SFP Slots
SFP Present
System LEDs
AC Power Socket
-
100 240V~50-60Hz 1.5A
1-1

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

8126l2 - annexe 1

Table of Contents