Configuring Address Filtering - SMC Networks TigerSwitch SMC6709FL2 Management Manual

C I
ONSOLE NTERFACE
Mac Address
-------------------------------
0030299434DE
actions->
Tab=Next Item

Configuring Address Filtering

Use the Filtering MAC Address page to drop traffic from unwanted
stations based on the source MAC address (and associated VLAN if
tagged VLANs are enabled).
Field Attributes
• MAC Address – Source MAC address.
• Vlan ID – ID of configured VLAN (1-4094). This option is only
available if IEEE 802.1Q tagged VLANs are enabled (page 4-23).
Console – Click Switch Static Configuration=>MAC Address
Configuration=>Filtering MAC Address. Click <Add> to open the Add
Filter MAC Address page. Enter a MAC address and associated VLAN,
then save your settings.
4-30
Tiger Switch 10/100 6709FL2 : Static MAC Address Configuration
===========================
Port num Vlan ID
2 1
<Add> <Edit>
Add/Edit/Delete static MAC addresses.
BackSpace=Previous Item
Mac Address Port num
-------------------------------
<Delete> <Save>
Quit=Previous Menu
Vlan ID
<Quit>
Enter=Select Item