Advertisement
SECTIONS
Table of Contents
INSTallaTIoN
Step 4 – Power ON
1. for all models, connect the power adapters on both the Secure
KVM Extender's Transmitter and Receiver at the PC SIDE, DC IN port.
Power oN the unit by plugging it into an aC wall outlet.
2. The PC SIDE Power lED should light green continuously. If not, check
the connections.
Step 5 – Make sure the connected PC on the Transmitter side and
Display or Projector on the Receiver side are powered ON .
HSL Secure Extended Isolators Quick Setup Guide
1
2
Power LED
3
Power LED
6
Advertisement
