Advertisement
Quick Links
Advertisement
Related Manuals for HighSecLabs FICE11PH-M
Summary of Contents for HighSecLabs FICE11PH-M
- Page 1 SECURE K VM EX TENDERS | QUICK SETUP GUIDE Models: FICE11PH-M - DP/HDMI Secure Copper KVM Extender FVCE11PH-M - DP/HDMI Secure Copper Video Extender FIFE11PH-M - DP/HDMI Secure Fiber KVM Extender FVFE11PH-M - DP/HDMI Secure Fiber Video Extender HDC19956 Rev. 3.4...
- Page 2 SECTIONS Table of Contents TablE of CoNTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 HSl Secure KVM Extenders family .
- Page 3 SECTIONS Table of Contents INTRoDUCTIoN HSL Secure KVM Extenders Family The Secure KVM Extender extends video, audio and Keyboard/Mouse signals up to hundreds of meters while it prevents vulnerable peripherals from mediating between compromised and secure computers by ensuring that video, audio and KM flow are in a single direction. Display or Projector Computer Video...
-
Page 4: Installation
The device’s Receiver and Transmitter may be located in different rooms or even different buildings. Connect the two parts with a suitable cable through the connection port: • Models FICE11PH-M, FVCE11PH-M and FICE11CH-M - with a Copper Cable • Models FIFE11PH-M and FVFE11PH-M - with optical fiber Cable KB/Mouse... - Page 5 1. Video connection: for all models, connect the PC to the Isolator Extender’s VIDEo IN port, using the HDMI or DP video cable 2. PC Keyboard and Mouse connection: for fICE11PH-M, fIfE11PH-M models, connect the PC to the Isolator using a USb a to USb b cable.
- Page 6 1. Video connection: for all models, connect the monitor/projector cable to the Isolator’s VIDEo oUT port. 2. PC keyboard and mouse connection: for fICE11PH-M, fIfE11PH-M models, connect a USb mouse and keyboard, to the Isolator Extender Receiver’s corresponding MoUSE and Kb ports.
- Page 7 SECTIONS Table of Contents INSTallaTIoN Step 4 – Power ON 1. for all models, connect the power adapters on both the Secure KVM Extender’s Transmitter and Receiver at the PC SIDE, DC IN port. Power oN the unit by plugging it into an aC wall outlet. 2.
-
Page 8: Operation
SECTIONS Table of Contents oPERaTIoN Running an EDID Capture Receiver before using the Extender, run a one-time EDID capture on both sides – Transmitter and Receiver. This prevents the continuous transfer of potentially malicious data - from the display to the PC – that could infect the PC, cause data leakage, and so on. -
Page 9: Safety And Regulatory Statements
If you are aware of a potential security vulnerability while installing this product, please observe the following precautions. contact Technical Support immediately by: • Web form: www.highseclabs.com/support/case/ • Instructions: Do not disable the power grounding plug. The grounding plug is an • Email: security@highseclabs.com important safety feature. - Page 10 Highseclabs.com ©2023 all rights reserved. HSl logo and product names are trademarks or service trademarks of HighSeclabs ltd (HSl). all other marks are the property of their respective owners. Images for demonstration purposes only. This document may contain confidential and/or proprietary information of HSl Corporation, and its receipt or possession does not convey any right to reproduce, disclose its contents, or to manufacture or sell anything that it may describe.