Advertisement
SECTIONS
Table of Contents
INSTallaTIoN
Step 1 – Connect the Secure KVM Extender's Receiver and the
Transmitter parts
The device's Receiver and Transmitter may be located in different
rooms or even different buildings.
Connect the two parts with a suitable cable through the connection
port:
• Models FICE11PH-M, FVCE11PH-M and FICE11CH-M - with a
Copper Cable
• Models FIFE11PH-M and FVFE11PH-M - with optical fiber Cable
Note: If either lED remains off, the Isolator does not recognize the
device. Use an alternative device!
HSL Secure Extended Isolators Quick Setup Guide
1
2
KB/Mouse
LEDs
EDID LEDs
3
Receiver
EDID LEDs
Transmitter
3
Advertisement
