Advertisement
SECTIONS
Table of Contents
INSTallaTIoN
Step 3 – Connecting the peripherals to the
Secure KVM Extender Receiver (CoNSolE SIDE)
1. Video connection: for all models, connect the monitor/projector
cable to the Isolator's VIDEo oUT port.
2. PC keyboard and mouse connection: for fICE11PH-M, fIfE11PH-M
models, connect a USb mouse and keyboard, to the Isolator Extender
Receiver's corresponding MoUSE and Kb ports.
both mouse and keyboard lEDs should light continuously green when
Kb and Mouse are connected and device is turned on.
Note: If either lED remains off, the Extended Isolator does not
recognize the device.
Use an alternative device!
HSL Secure Extended Isolators Quick Setup Guide
1
2
Rx to Tx
Connection LED
Video Transfer
KB/Mouse LED
3
Power LED
LED
EDID Lock
EDID LED
5
Advertisement
