Takeoff Tour - Garmin GNS 530 Pilot's Manual And Reference

1.3 TAKEOFF TOUR

Overview
The Garmin GNS 530 provides the pilot accurate
navigational data and communication capability, along
with non-precision and precision approach certification
in the IFR environment. The takeoff tour is designed to
flight plans
available as part of the
used for most of the in-flight navigation.
The takeoff tour assumes that the unit and antennas
have been properly installed and that the GNS 530' s
default settings have not been changed. If any of the
position format, units of measure,
time, Garmin recommends that the aircraft be moved to a
location that is well away from buildings and other aircraft
so the unit can collect satellite data without interruption.
This takeoff tour is intended to provide a brief
introduction of the GNS 530' s major features. Sections
others in additional detail. Refer to these sections, as
needed to learn or review the details regarding a particular
feature.
190-00181-00 Rev. G
If more information is needed, Garmin' s Customer
Service staff is available during normal business hours
listed on page ii. Garmin can also be reached by mail
Powering up the GNS 530
The GNS 530' s power and
using the COM Power/Volume knob at the top left
corner of the unit. Turning it clockwise turns unit power
the unit on, a welcome page is displayed while the unit
performs a
GNS 530(A) Pilot's Guide and Reference
SECTION 1
INTRODUCTION
volume are controlled
Figure 1-4 Unit Type Page
1-5