SMC Networks EZ Connect SMCWEB-N User Manual page 33

Tools_Firmware
Use the Firmware section to install the latest firmware to improve functionality and performance.
To upgrade the firmware, follow these steps:
1. Click the
Browse
2. Once you have found the file to be used, click the
This can take a minute or more.
3. Wait for the access point to reboot. This can take another minute or more.
4. Confirm updated firmware revision on status page.
Firmware Information
Here are displayed the version numbers of the firmware currently installed in your access point and the most
recent upgrade that is available.
Firmware Upgrade
Note: Firmware upgrade cannot be performed from a wireless device. To perform an upgrade, ensure that
you are using a PC that is connected to the access point by wire.
Note: Some firmware upgrades reset the configuration options to the factory defaults. Before performing an
upgrade, be sure to save the current configuration from the
Upload
Once you have a firmware update on your computer, use this option to browse for the file and then upload the
information into the access point.
button to locate the upgrade file on your computer.
button below to start the firmware upgrade process.
Upload
Tools → System screen.
29