Page 2
GENERAL WARNINGS 11. Only use Shark® branded filters 24. Turn off all controls before plugging in 21. Your Shark® Vacuum may not or unplugging the vacuum. and accessories. Failure to do so Your vacuum cleaner may consist of be designed to stand up on its own.
Page 3
ASSEMBLY ASSEMBLY (Click) (Click) (Click) (Click) (Click) (Click) 1. Place pod onto floor nozzle post. 2. Insert wand into pod. 3. Attach the bottom accessory holder onto the pod. 4. Insert handle into wand. 5. Attach hose clip to wand. 6.
Page 4
WHOLE-HOME CLEANING WHOLE-HOME CLEANING SETTINGS CLEANING MODES POWER/SURFACE SWITCH SUCTION CONTROL UPRIGHT Suction Control offers variable suction Select surface setting: To engage brushroll, place foot on floor based on your needs. Slide to MIN to reduce nozzle and tilt handle back. O Power Off suction and increase maneuverability on I Hard Floor...
Page 5
EMPTYING THE DUST CUP CLEANING AND REPLACING THE FILTERS IMPORTANT: Unplug the power cord before performing any maintenance. CLEANING FILTERS Regularly clean and replace your filters to keep your vacuum's suction power optimal. To clean filters, rinse with cold water only to prevent damage from cleaning chemicals. Allow all filters to air-dry for at least 24 hours before reinstalling them to prevent liquid from being drawn into electric parts.
Page 6
MAINTENANCE CHECKING FOR BLOCKAGES WITH ™ Zero-M Technology ™ TECHNOLOGY Zero-M Technology™ actively removes hair wrap from your brushroll while you vacuum, with uncompromised cleaning power. If you run over a hard or sharp object or notice a noise change while vacuuming, check for blockages or objects caught in the brushroll.
Page 7
NOTE: Not all accessories come with all units. Please see the enclosed Quick Start Guide for your unit's For all other issues, please call Shark Customer Service 1-800-798-7398. configuration. To order additional accessories, visit sharkaccessories.com.
Need help?
Do you have a question about the Navigator Lift-Away Zero-M Speed R-ZU560 and is the answer not in the manual?
Questions and answers
NEED SEALS FOR DUST CAP (3)