Chemical Accident Procedures - Brave MBRSW1040EA.2 Owner's Manual

Table of Contents

Advertisement

Summary of Important Safety Information (continued)
CLEAN up spills immediately per instructions on chemical labels.
TURN OFF power to sprayer and RELIEVE system pressure before leaving sprayer unattended.
SEE Troubleshooting section of this manual before attempting any repairs. Wear personal protective
equipment and follow safety instructions.
After Spraying
SOAK vegetation in the area surrounding the work zone immediately after spraying bleach. Bleach can kill
vegetation if not soaked thoroughly. Cover delicate vegetation.
CLEAN sprayer immediately after use according to the directions provided in this manual.
DECONTAMINATE yourself after you are done spraying and have cleaned the sprayer. Wash all exposed
areas of the body with soap and water and remove and launder clothing.
DISPOSE OF or STORE remaining chemicals in secure storage with correctly marked container.
Immediate response is necessary in the event of sprayer leaks, bodily chemical contact, poisoning, or spills.
See instructions below:
Sprayer leak
Bodily chemical
contact
Poisoning by
ingestion or
inhalation
Chemical spills

Chemical accident procedures

If the sprayer develops a leak, immediately stop spraying. Turn off power to the
sprayer and follow directions below, as applicable.
Personal contamination can occur when chemicals splash, spill, or spray
directly onto a person.
1. Immediately follow First Aid instructions on chemical label.
General procedures for contact with bleach or surfactant includes:
a) Eyes – immediately rinse with water for 15 minutes. If irritation persists,
contact a doctor.
b) Skin – rinse all contaminated skin surfaces with water. If irritation
persists, contact a doctor.
c) Clothing – remove contaminated clothing. Dispose of heavily
contaminated clothing per chemical label instructions.
2. Seek medical advice if instructed on the label or the victim experiences
symptoms of harmful effects. Bring the chemical label for reference.
In case of poisoning from ingestion or inhalation:
If the victim has collapsed or is not breathing, call 911. Otherwise:
1. If you are the victim, immediately seek assistance from nearby personnel
because you may become incapacitated.
2. Immediately follow first aid instructions on chemical label.
General procedures for ingestion or inhalation of bleach or surfactant
includes:
a) For ingestion: Drink a glassful of water. Call a doctor or poison control
center. DO NOT induce vomiting unless instructed to do so by a doctor
or poison control center.
b) For inhalation: Immediately move to fresh air.
3. Call a poison control center for further advice. In the U.S., call 1-800-222-1222.
Have the chemical label available for reference.
Chemical spills must be quickly contained and properly cleaned up.
Refer to the chemical label for any specific clean-up instructions.
General procedures include:
1. Controlling the spill by stopping the source of the spill.
2. Containing the spill so that it does not spread and get into water sources.
3. Cleaning up the spill immediately.
4. Seeking additional advice from:
- Chemical manufacturer. See chemical label for contact information.
- State pesticide regulatory agency. In the U.S., call the National Pesticide Info.
Ctr. at 800-858-7378 for assistance in contacting your state's agency.
6

Advertisement

Table of Contents
loading

This manual is also suitable for:

Brsw1040e

Table of Contents