Step Two: Fill The Sprayer - Brave MBRSW1040EA.2 Owner's Manual

Operation - Using the Sprayer (continued)
Step 2: Fill the sprayer.
• ALWAYS wear personal protective equipment as directed on the chemical
labels when handling chemicals.
• Long pants and sleeves, chemical resistant gloves, and eye protection are
strongly recommended. Additional protective gear may be required depending
on the particular chemical.
Fill the sprayer using the following steps:
Review the Operation – Important Safety Information section related to General
1. Review safety
information Chemical Safety and Chemical Accident Procedures provided in this manual.
2. Choose safe Choose a safe mixing and loading area.
mixing/ - Choose an outdoor, well-ventilated area away from unprotected people, animals,
loading area food, and other items that might become contaminated.
3. Wear personal Wear personal protective equipment as directed on the chemical label. Goggles,
protective gloves, long sleeves, and pants are recommended while mixing chemicals.
equipment NOTE: Clothes may be damaged by bleach.
4. Turn off Turn OFF power to the sprayer before filling.
sprayer
5. Remove fill Remove the fill cap located on top of the sprayer.
cap
6. Ensure tank Ensure tank is flushed of all chemicals from prior use.
flushed - Chemicals can interact dangerously when mixed. Residue chemicals are also a health
hazard.
WARNING
Fill Cap
31