Step Four: Install Pump And Fittings - Brave MBRSW1040EA.2 Owner's Manual

Step 4 – Install pump and fittings
• Remove red shipping plugs from pump ports.
• Install inlet assembly into inlet port of pump and slide QC
clip closed.
• Lubricate tank grommet with water and slide suction tube
into grommet.
• Install pump to tank with (3) #10 x 25mm screws, (1) #10 x
28mm screw, and (4) #10 flat washers. Attach cap tether to
longer screw.
• Install QC x 5/8" fitting into outlet port of pump and slide
QC clip closed.
NOTE: To insert quick connect fittings, lubricate O-ring
with water and twist fitting while inserting into pump port.
Fasteners Needed from Owner's Manual Bag:
#10 flat washer Screw, #10 x 32mm
82068
(Qty 4)
Inlet assembly
Grommet
Assembly
Screw, #10 x 28mm
82617
(Qty 1)
Screw, #10 x 25mm
#10 Flat washer
Fitting, QC x 5/8" HB
82061
(Qty 3)
Screw, #10 x 28mm (qty 1)
15
Tools Needed
• Phillips
screwdriver
799878
(Qty 1)
Cap tether
Fitting, QC x 5/8" HB