Brother DCP-540CN Quick Start Manual page 15

Hide thumbs Also See for DCP-540CN:

Table of Contents

STEP2

Installing the Driver & Software

For Network Interface Users (DCP-540CN only)

(For Mac OS

Improper Setup

Make sure that the cable does not restrict the

cover from closing, or an error may occur.

X 10.2.4 or greater)

Note

Make sure that the machine is turned on by

connecting the power cord.

Turn on your Macintosh

Put the supplied CD-ROM into your CD-ROM

drive.

Double-click the Start Here OSX icon to install.

Follow the on-screen instructions.

Please wait, it will take a few seconds for the

software to install. After the installation, click

Restart to finish installing the software.

The Brother software will search for the Brother

device.

Note

• If the machine is configured for your network,

choose the machine from the list, and then click

OK. This window will not appear if there is only one

machine connected on the network, it will be

chosen automatically. Go to step 9.

• If this screen appears click OK.

Macintosh

Table of Contents

Dcp-330c