Related Manuals for ROBAND AUSTHEAT AHT860
Summary of Contents for ROBAND AUSTHEAT AHT860
- Page 1 Manufactured By Instruction Manual FREESTANDING ELECTRIC HOTPLATE & TOASTER AHT860 Version 6...
-
Page 2: Table Of Contents
CONTENTS PARTS INCLUDED Product Features Electrical Hotplate & Toaster (AHT860) ▪ Specifications Instruction Manual Parts Included ▪ Safety Instructions Any damage to the machine as a result of Cleaning & Maintenance freight must be reported to the Freight Installation Company and to the agent responsible for the General Information despatch of machine within 24 hours of receipt. -
Page 3: Cleaning & Maintenance
This machine contains no user-serviceable parts. qualified servicepersons to gain access to the Roband®, one of our agents, or a similarly machine. qualified person(s) should carry out repairs. CLEANING & MAINTENANCE Keep cord away from heated surfaces. WARNING: Switch off at mains switch and allow Do not remove any cover panels from the to cool prior to cleaning. -
Page 4: Installation
INSTALLATION CAUTION: Do not attach any other items, machines or brackets to these units as any such Remove all packaging materials, tape, and any alterations may change the thermal properties protective plastic from the machine. Remove or safety aspects of these machines and will void any glue residue from the protective plastic or any warranty. -
Page 5: General Information
If the unit shuts down a second time this is confirmation that the unit is GENERAL INFORMATION overheating and you should call Roband Australia or your local electrician for service. This appliance is designed as a floor mounted unit. - Page 6 WARNING: THE ON/OFF SWITCH DOES NOT PROVIDE COMPLETE ISOLATION – refer to section: ELECTRICAL CONNECTION CONTROL DESCRIPTION Both the hotplate and toaster have idle/cook functions, meaning you are able to have 2 pre-set temperatures to switch between. Simply set the thermostats on the lower control panel to your desired cooking or idle (non-peak cooking period) temperatures and switch between the two during...
-
Page 7: Operation
It is suggested that the “Cook” energy regulator be set between 4-HIGH, and that the “Idle” energy regulator be set to 2. This will allow the elements to stay warm while using minimal power and will speed up the recovery time when the “Cook”... -
Page 8: Worksation Layout
3. Once the amber pilot light switches off, WORKSATION LAYOUT cooking may commence (temperature has been Roband Australia recommends that areas reached). Notice the amber pilot light will cycle between this unit and other machines and/or on/off in sync with when the thermostat energises work-surfaces be kept clear of any potential the elements. -
Page 9: Thermal Cutouts
1.2 Check – Is air still flowing through the grease If the Hotplate continues to perform without any box guide? further tripping of the thermal cut-out after step 3, then there is a strong possibility that the 1.3 Probable Cause – (If Yes) – Overtemp has cut thermostat in use at the time is faulty, or that one out. -
Page 10: Spare Parts
SPARE PARTS MC0609 Adjustable Leg MC0610 Castor EC0225 Circuit Breaker – 32A MC0649 Toasting Rack ES0232 Mains Rotary Switch – 4 Pole PC0276 Bush – 1 3/8” Nylon 6/6 EC0245 Rail Mounted Terminal Block Red PC0287 3/4” Plastic Knockout Plug EC0246 Rail Mounted Terminal Block Blue PC0288... - Page 12 Tubular Heating Elements is not a warranty fault. Roband or any subsidiary company or Agent shall not be liable for loss of profit or damage to other equipment and property except where it is in breach of the guarantees provided in accordance with applicable legislation.
Need help?
Do you have a question about the AUSTHEAT AHT860 and is the answer not in the manual?
Questions and answers